FM200 (HFC227EA) Gas extinguishing Systems:
FM200 Gas extinguishing systems are odorless, have no electrical conductivity and provide clean extinguishing without causing any pollution in the environment.
It does not have a direct poisonous effect like CO2 (Carbon Dioxide) gas, and it is also important that it does not have any effect on the ozone layer.
FM200 has the feature of suppressing fire by creating an effect on cooling and oxygen. In order for it to be effective, the area where it is used must be subjected to a room tightness test, the area must be completely closed, and there must be no air inlet/exit to the outside.
An electronic detection system is generally used to trigger the system.
Places of use: Data processing rooms, electrical transformer and panel rooms, chemical warehouses, archives, telecommunication rooms, security cabinets, museums.
Room tightness test: Room tightness test is a practice performed to determine whether a building or room has air leaks to the outside. This process can be done for purposes such as energy efficiency in buildings and preventing heat loss.
For more detailed information you can call us.
Carbon Dioxide (CO2) Gas Extinguishing Systems:
These systems are used in cases where they are not fully closed and the sealing condition cannot be met, in other words, FM200 extinguishing systems cannot be used.
The most important thing to consider here is; Since this gas has a direct poisonous effect, there is no human or any living creature in the area where it is used, or if there is, there is a control mechanism that will ensure the necessary evacuation before the gas is discharged.
It is used integrated with electronic detection systems. General areas of use: Electrical transformer and panel rooms, generator cabins, special areas.
For more detailed information you can call us.
Novec 1230 Gas Extinguishing Systems:
Novec 1230 is a colorless and odorless gas that is non-conductive. It suppresses the heat and performs the extinguishing process without affecting the oxygen gas in the environment. Even if inhaled at certain concentrations, it has no effect on human health. Thanks to these features, it is advantageous compared to all other gas extinguishing systems.
It is very important to maintain the extinguishing systems following their installation and to weigh and fill the cylinders in the periods specified by the regulations or the manufacturer.
For more detailed information you can call us.
Aerosol Extinguishing Systems:
It is an extinguishing system consisting of solid particles in aerosol cabins that are generally hung on the wall or ceiling in the environment where it is located.
Areas of use: It is used in closed areas where solid, petroleum products, oil, gaseous materials such as plastic, wood and paper, and low voltage and low current electrical and electronic products are located.
For more detailed information you can call us.;
Ceiling type sprinkler head extinguishing device:
These are systems that work by exploding the sprinkler at the end of the device and discharging the extinguishing agent in the tube into the environment when the ambient temperature is 68°C - 79°C - 93°C.
ABC Dry chemical powder, various extinguishing gases and foam can be placed in the tube depending on the area to be used and the products in the area.
It can be used in warehouses and warehouses, electrical panel and transformer rooms, indoor car parks and chemical product warehouses.
Other extinguishing systems:
• Fire balls
• Portable aerosol extinguishers
• Vehicle-bus extinguishing systems
You can call us for detailed information.